`

Copyright © 2009 Future Technology Devices International Limited

16

Document Reference No.: FT_000017

VDIP2 Vinculum VNC1L Module Datasheet Version 1.0

Clearance No.: FTDI# 145

4 Firmware

4.1.1 Firmware Support

from the FTDI website.

VDAP Firmware: USB Host for single Flash Disk and General Purpose USB peripherals. Selectable

UART, FIFO or SPI interface command monitor.

VDPS Firmware: USB Host for single Flash Disk and General Purpose USB peripherals. USB Slave

port connection for connecting to host PC. Selectable UART, FIFO or SPI interface command

monitor.

VDFC Firmware: USB Host for two Flash Disks, Selectable UART, FIFO or SPI interface command

monitor.

VCDC Firmware: USB Host for automatic connection to USB Communications Class Devices. UART

interface command monitor.

VDIF Firmware: USB Host for single Flash Disk and General Purpose USB peripherals. Selectable

UART, FIFO, SPI or USB interface command monitor.

4.1.2 Firmware Upgrades

The VDIP2 module is supplied pre-loaded with the VDAP firmware.

There are two methods of upgrading the firmware on the VDIP2. These methods are described in a

Vinculum Firmware manual please refer to:-

http://www.vinculum.com/documents/fwspecs/UM_VinculumFirmware_V205.pdf