PIC18F23K20-ESLASHML datasheet(195/456 Pages) MICROCHIP

195 / 456 page

 2010 Microchip Technology Inc.

DS41303G-page 195

PIC18F2XK20/4XK20

SSPCON1: MSSP CONTROL 1 REGISTER (SPI MODE)

R/W-0

WCOL

SSPOV

SSPEN

CKP

SSPM3

SSPM2

SSPM1

SSPM0

bit 7

bit 0

Legend:

R = Readable bit

W = Writable bit

U = Unimplemented bit, read as ‘0’

-n = Value at POR

‘1’ = Bit is set

‘0’ = Bit is cleared

x = Bit is unknown

bit 7

WCOL: Write Collision Detect bit (Transmit mode only)

= The SSPBUF register is written while it is still transmitting the previous word

(must be cleared by software)

= No collision

bit 6

SSPOV: Receive Overflow Indicator bit(1)

SPI Slave mode:

= A new byte is received while the SSPBUF register is still holding the previous data. In case of over-

flow, the data in SSPSR is lost. Overflow can only occur in Slave mode. The user must read the

SSPBUF, even if only transmitting data, to avoid setting overflow (must be cleared by software).

= No overflow

bit 5

SSPEN: Synchronous Serial Port Enable bit(2)

= Enables serial port and configures SCK, SDO, SDI and SS as serial port pins. When enabled, the

SDA and SCL pins must be configured as inputs.

= Disables serial port and configures these pins as I/O port pins

bit 4

CKP: Clock Polarity Select bit

= Idle state for clock is a high level

= Idle state for clock is a low level

bit 3-0

SSPM<3:0>: Synchronous Serial Port Mode Select bits(3)

0101

= SPI Slave mode, clock = SCK pin, SS pin control disabled, SS can be used as I/O pin

0100

= SPI Slave mode, clock = SCK pin, SS pin control enabled

0011

= SPI Master mode, clock = TMR2 output/2

0010

= SPI Master mode, clock = FOSC/64

0001

= SPI Master mode, clock = FOSC/16

0000

= SPI Master mode, clock = FOSC/4

Note 1:

In Master mode, the overflow bit is not set since each new reception (and transmission) is initiated by

writing to the SSPBUF register.

When enabled, these pins must be properly configured as input or output.

Bit combinations not specifically listed here are either reserved or implemented in I2C mode only.

PIC18F23K20-E/ML Datasheet(PDF) 195 Page - Microchip Technology

PIC18F23K20-E/ML Datasheet(HTML) 195 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL