 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
PIC18F4580-E/ML Datasheet(PDF) 262 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC18F4580-E/ML Datasheet(HTML) 262 Page - Microchip Technology |
|
|
262 / 490 page  PIC18F2480/2580/4480/4580 DS39637D-page 262 © 2009 Microchip Technology Inc. 20.7 Use of the CCP1 Trigger An A/D conversion can be started by the “Special Event Trigger” of the ECCP1 module. This requires that the ECCP1M<3:0> bits (ECCP1CON<3:0>) be pro- grammed as ‘1011’ and that the A/D module is enabled (ADON bit is set). When the trigger occurs, the GO/DONE bit will be set, starting the A/D acquisition and conversion and the Timer1 (or Timer3) counter will be reset to zero. Timer1 (or Timer3) is reset to automat- ically repeat the A/D acquisition period with minimal software overhead (moving ADRESH/ADRESL to the desired location). The appropriate analog input chan- nel must be selected and the minimum acquisition period is either timed by the user, or an appropriate TACQ time selected before the “Special Event Trigger” sets the GO/DONE bit (starts a conversion). If the A/D module is not enabled (ADON is cleared), the “Special Event Trigger” will be ignored by the A/D module, but will still reset the Timer1 (or Timer3) coun- ter. TABLE 20-2: REGISTERS ASSOCIATED WITH A/D OPERATION Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reset Values on Page: INTCON GIE/GIEH PEIE/GIEL TMR0IE INT0IE RBIE TMR0IF INT0IF RBIF 55 IPR1 PSPIP ADIP RCIP TXIP SSPIP CCP1IP TMR2IP TMR1IP 58 PIR1 PSPIF ADIF RCIF TXIF SSPIF CCP1IF TMR2IF TMR1IF 58 PIE1 PSPIE ADIE RCIE TXIE SSPIE CCP1IE TMR2IE TMR1IE 58 IPR2 OSCFIP CMIP — EEIP BCLIP HLVDIP TMR3IP ECCP1IP(5) 57 PIR2 OSCFIF CMIF — EEIF BCLIF HLVDIF TMR3IF ECCP1IF(5) 58 PIE2 OSCFIE CMIE — EEIE BCLIE HLVDIE TMR3IE ECCP1IE(5) 58 ADRESH A/D Result Register High Byte 56 ADRESL A/D Result Register Low Byte 56 ADCON0 — — CHS3 CHS2 CHS1 CHS0 GO/DONE ADON 56 ADCON1 — — VCFG1 VCFG0 PCFG3 PCFG2 PCFG1 PCFG0 56 ADCON2 ADFM — ACQT2 ACQT1 ACQT0 ADCS2 ADCS1 ADCS0 57 PORTA RA7(2) RA6(2) RA5 RA4 RA3 RA2 RA1 RA0 58 TRISA TRISA7(2) TRISA6(2) PORTA Data Direction Register 58 PORTB Read PORTB pins, Write LATB Latch 58 TRISB PORTB Data Direction Register 58 LATB PORTB Output Data Latch 58 PORTE(4) — — — —RE3(3) Read PORTE pins, Write LATE(1) 58 TRISE(4) IBF OBF IBOV PSPMODE — PORTE Data Direction 58 LATE(4) — — — — — LATE2 LATE1 LATE0 58 Legend: — = unimplemented, read as ‘0’. Shaded cells are not used for A/D conversion. Note 1: These bits are unimplemented on PIC18F2X80 devices; always maintain these bits clear. 2: These pins may be configured as port pins depending on the Oscillator mode selected. 3: RE3 port bit is available only as an input pin when the MCLRE Configuration bit is ‘0’. 4: These registers are not implemented on PIC18F2X80 devices. 5: These bits are available on PIC18F4X80 and reserved on PIC18F2X80 devices. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
New Zealand ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
