mODEL NUmbERINg kEy

MHF+ 28 12 D F / 883

Base Model

Input Voltage

Output Voltage

Screening

Number of Outputs

(S = single, D = dual, T = Triple)

(R = decimal point, 3R3 = 3.3 Vout;

(Standard screening has no designator

in this position.)

Case Option

(Non-flanged case has no designator in

this position)

Main and aux. Vout for triple models)

SmD NUmbERS

5962-0251001HXC

MHF+283r3S/883

5962-9213901HXC

MHF+2805S/883

5962-0325301HXC

MHF+285r2S/883

5962-9166401HXC

MHF+2812S/883

5962-9160101HXC

MHF+2815S/883

5962-9689801HXC

MHF+2828S/883

5962-9555901HXC

MHF+2805d/883

5962-9214401HXC

MHF+2812d/883

5962-9161401HXC

MHF+2815d/883

5962-9560101HXC

MHF+28512t/883

5962-9560201HXC

MHF+28515t/883

Flanged SMds have the suffix HZC instead of HXC.

For exact specifications for an SMd product, refer to the

SMd drawing. SMds can be downloaded from http://

www.dscc.dla.mil/programs/smcr

mODEL SELECTION

Category

MHF+28

___________

/

Base Model and

input voltage

1R9, 3R3, 05, 5R2,

5R3, 12, 15, 28

S

(non-Flanged leave blank)

(Standard

leave blank)

MHF+28 is the only

available option

05, 12, 15

D

F (Flanged)

ES

SeleCtion

512, 515

T

883

notes:

1. output voltage: an r indicates a decimal point. 1r9 is 1.9 volts out. the values of 1r9, 3r3, 5r2 and 5r3 are only available in single output models. the 512 and

515 triple output converters are +5 volt main and ±12 or ±15 volt auxiliaries.

2. number of outputs: S is a single output, d is a dual output, and t is a triple output

3. Case options: For the standard case (non-flanged) leave the case option blank. For the flanged case, use an F in the case option.

4. Screening: For standard screening leave the screening option blank. For other screening options, insert the desired screening level. For more information see

Screening tables 1 and 2.

www.interpoint.com

Page 7 of 23

Crane aerospace & electronics Power solutions

MHF+ Single, dual and triple dC/dC Converters

28 VOlT inPuT – 15 WATT

MHF+ rev l - 20091113