9

9 - 8

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

Evaluation PCB

the circuit board used in the final application should use rF circuit design techniques. signal lines should have

50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the

ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and

bottom ground planes. the evaluation circuit board shown is available from Hittite upon request.

HMC682LP6C / 682LP6CE

v00.0308

HIGH IP3 DUAL CHANNEL

DOWNCONVERTER w/ LO SWITCH, 1.7 - 2.2 GHz