For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

4

4 - 9

HMC862LP3E

v03.1210

0.1 - 15 GHz LOW NOISE PROGRAMMABLE

DIVIDER (N = 1, 2, 4, 8)

Evaluation PCB

item

Description

J1 - J3

PcB Mount sMA-F rF connector

J4

Dc connector Header, Molex 2mm

c1 - c4

Atc530L, 100 nF, 16v, Broadband capacitor, 0402 Pkg.

c5, c6

1000 pF capacitor, 0402 Pkg.

c7, c8

4.7 µF capacitor, tantalum, 1206 Pkg.

r1 - r3

10 kohm resistor, 0402 Pkg.

vcc1, vcc2

Mill-Max 0.040" Dia. Pc Pin, 3101-2-00-21-00-00-08-0

u1

HMc862LP3e, Programmable Divider

119349 evaluation Board

[1] reference this number when ordering complete evaluation PcB

[2] circuit Board Material: rogers 4350 or Arlon 25Fr

the circuit board used in the application should

use rF circuit design techniques. signal lines

should have 50 ohm impedance while the package

ground leads and backside ground paddle should be

connected directly to the ground plane similar to that

shown. A sufficient number of via holes should be

used to connect the top and bottom ground planes.

the evaluation circuit board shown is available from

Hittite upon request.