V2R-D1B1-025 datasheet(4/12 Pages) MAGNETROL

4 / 12 page

The Solitel switch is mounted to the vessel using a

11⁄2" NPT threaded connection.

•

Ensure that the tip of the probe is located at the desired

switching point giving consideration to the slope angle of

the material.

•

The switch may be installed vertically or horizontally

(at a downward angle) as shown in Figure 1 on page 3.

•

Avoid mounting the sensor in a recess where build-up

could dampen the vibration. See Figure 2.

•

Do not cut or bend the vibrating rod.

IMPORTANT: A deflection plate is required when the

probe is exposed to falling material, collapsed arch, or, in the

case of a low level switch, when the drag force of the empty-

ing material exceed the specifications. The deflector can be

a baffle plate or angle iron (11⁄2"

× 11⁄

× 1⁄

") located 4 to

6 inches above the rod. See Figure 3.

Observe the specifications for bending force(F),

torque(M), and pull force(F) as indicated below:

See Figure 4.

Standard:

F = 100 pounds (445 N)

M = 63 foot pounds (85 Nm)

Extended Rigid:

M = 63 foot pounds (85 Nm)

Extended Flexible:

F = 10,000 pounds (45 kN)

When using an extended length version for low level

alarm, mount the probe above the outlet of the vessel to

avoid the probe being dragged along by the outflowing

material.

2.3

Electrostatic Discharge (ESD)

Handling Procedure

Magnetrol’s electronic instruments are manufactured to

the highest quality standards. These instruments utilize

electronic components which may be damaged by static

electricity present in most work environments. The

following steps are recommended to reduce the risk of

component failure due to electrostatic discharge:

1. Ship and store circuit boards in anti-static bags. If an

anti-static bag is not available, wrap board in aluminum

foil. Do not place boards on foam packing materials.

56-601 Solitel Vibrating Rod Level Switch

VXH

VXR

VXK

F M

Figure 4

Figure 2

Figure 3

V2R-D1B1-025 Datasheet(PDF) 4 Page - Magnetrol International, Inc.

V2R-D1B1-025 Datasheet(HTML) 4 Page - Magnetrol International, Inc.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

Datasheet Download

Link URL