| Electronic Components Datasheet Search |
|
TS3011 Datasheet(PDF) 4 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
TS3011 Datasheet(HTML) 4 Page - STMicroelectronics |
|
4 / 14 page ![]() Electrical characteristics TS3011 4/14 Doc ID 022078 Rev 1 Table 4. VCC =+2.7V, VICM =VCC/2, Tamb = +25°C (unless otherwise specified) (1) Symbol Parameter Test conditions Min. Typ. Max. Unit VIO Input offset voltage(2) -40°C < Tamb < +125°C -7 -9 -0.1 7 9 mV ΔVIO Input offset voltage drift -40°C < Tamb < +125°C 5 20 μV/°C VHYST Input hysteresis voltage (3) 2mV IIO Input offset current(4) -40°C < Tamb < +125°C 120 100 pA IIB Input bias current -40°C < Tamb < +125°C 120 100 pA ICC Supply current No load, output high -40°C < Tamb < +125°C No load, output low -40°C < Tamb < +125°C 0.52 0.66 0.65 0.9 0.89 1.1 mA ISC Short circuit current Source Sink 24 19 27 22 mA VOH Output voltage high Isource =4 mA -40°C < Tamb < +125°C 2.48 2.40 2.52 V VOL Output voltage low Isink = 4 mA -40°C < Tamb < +125°C 130 170 220 mV CMRR Common mode rejection ratio 0 < VICM < 2.7 V 52 70 dB TPLH Propagation delay(5) low to high output level CL = 12 pF, RL = 1 MΩ Overdrive = 5 mV Overdrive = 15 mV Overdrive = 50 mV 16 11 913 ns TPHL Propagation delay(6) high to low output level CL = 12 pF, RL = 1 MΩ Overdrive = 5 mV Overdrive = 15 mV Overdrive = 50 mV 16 11 913 ns TR Rise time (10% to 90%) CL = 12 pF, RL = 1 MΩ Overdrive = 100 mV 2.3 ns TF Fall time (90% to 10%) CL = 12 pF, RL = 1 MΩ Overdrive = 100 mV 1.8 ns 1. All values over the temperature range are guaranteed through correlation and simulation. No production tests are performed at the temperature range limits. 2. The offset is defined as the average value of positive (VTRIP+) and negative (VTRIP-) trip points (input voltage differences requested to change the output state in each direction. 3. Hysteresis is a built-in feature of the TS3011. It is defined as the voltage difference between the trip points. 4. Maximum values include unavoidable inaccuracies of the industrial tests. 5. Overdrive is measured with reference to the VTRIP+ point. 6. Overdrive is measured with reference to the VTRIP- point. |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |