R5F5630ACDFB datasheet(5/165 Pages) RENESAS

5 / 165 page

R01DS0060EJ0100 Rev.1.00

Page 5 of 168

Sep 13, 2011

RX630 Group

1. Overview

Communication

function

USB 2.0 function

module (USBa)

 Includes a UDC (USB Device Controller) and transceiver for USB 2.0

 Single port

 Compliance with the USB 2.0 specification

 Transfer rate: Full speed (12 Mbps)

 Self-power mode and bus power are selectable

 Incorporates 2 Kbytes of RAM as a transfer buffer

Serial communications

interfaces (SCIc, SCId)

 13 channels (SCIc: 12 channels + SCId: 1 channel)

 SCIc

Serial communications modes: Asynchronous, clock synchronous, and smart-card

interface

Multi-processor function

On-chip baud rate generator allows selection of the desired bit rate

Choice of LSB-first or MSB-first transfer

Average transfer rate clock can be input from TMR timers for SCI5, SCI6, and SCI12

Simple I2C

Simple SPI

 SCId (The following functions are added to SCIc)

Supports the serial communications protocol, which contains the start frame and

information frame

Supports the LIN format

I2C bus interfaces

(RIIC)

 4 channels (one of them is FM+)

Communication formats

I2C bus format/SMBus format

Supports the multi-master

Max. transfer rate: 1 Mbps (channel 0)

IEBus (IEB)

 1 channel

 Supports protocol control for the IEBus

Half-duplex asynchronous transfer

Multi-master operation

Broadcast communications function

Two selectable modes, differentiated by transfer rate

CAN module (CAN)

 3 channels

 Compliance with the ISO11898-1 specification (standard frame and extended frame)

 32 mailboxes each

Serial peripheral

interfaces (RSPI)

 3 channels

 RSPI transfer facility

Using the MOSI (master out, slave in), MISO (master in, slave out), SSL (slave select),

and RSPCK (RSPI clock) signals enables serial transfer through SPI operation (four

lines) or clock-synchronous operation (three lines)

Capable of handling serial transfer as a master or slave

 Data formats

Switching between MSB first and LSB first

The number of bits in each transfer can be changed to any number of bits from 8 to 16,

or to 20, 24, or 32 bits.

128-bit buffers for transmission and reception

Up to four frames can be transmitted or received in a single transfer operation (with

each frame having up to 32 bits)

 Buffered structure

Double buffers for both transmission and reception

12-bit A/D converter (S12ADa)

 1 unit (1 unit × 21 channels)

 12-bit resolution

 Conversion time: 1.0 s per channel (in operation with PCLK at 50 MHz)

 Operating mode

Scan mode (single scan mode or continuous scan mode)

 Sample-and-hold function

 Reference voltage generation

 Three ways to start A/D conversion

Conversion can be started by software, a conversion start trigger from a timer (MTU,

TPU, or TMR), or an external trigger signal.

 A/D conversion of the temperature sensor output

Table 1.1

Outline of Specifications (4/5)

Classification

Module/Function

Description

R5F5630ACDFB Datasheet(PDF) 5 Page - Renesas Technology Corp

R5F5630ACDFB Datasheet(HTML) 5 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL