DS41614A datasheet(21/44 Pages) MICROCHIP

21 / 44 page

F1 LV EVALUATION PLATFORM

USER’S GUIDE

 2011 Microchip Technology Inc.

DS41614A-page 21

Chapter 3. Programming the F1 LV Evaluation Platform

3.1

INTRODUCTION

The F1 LV Evaluation Platform makes extensive use of the on-board peripherals of the

PIC16LF1947. This chapter provides guidance concerning the tools used for

programming the F1 LV Evaluation Board and a map of the board function to I/O pin

and pin function.

3.2

PROGRAMMING/DEVELOPMENT TOOL SUPPORT

The following development tools support the F1 LV Evaluation Platform:

1. PICkit™ 3

2. ICD 3

3. REAL ICE™ in-circuit emulator (with adapter AC164110)

The PICkit™ or ICD 3 tools can also power the F1 LV Evaluation Platform, therefore,

no additional hardware is required to get started. The ICSP pins of the PIC16LF1947

are dedicated to the PICkit ICSP connector, eliminating interactions between the

Evaluation Platform and the programmer/debugger.

If you are developing with the REAL ICE emulator ICD, you will need the AC164110

adaptor, or the high-speed trace adaptor. These adaptors provide the inline 6-pin

connector required by the PICkit ICSP programming capability interface. You will also

need a power supply, please see Chapter 2. “Getting Started” for more on powering

the F1 LV Evaluation Platform.

DS41614A Datasheet(PDF) 21 Page - Microchip Technology