Data brief

For further information contact your local STMicroelectronics sales office.

June 2010

Doc ID 17629 Rev 1

1/7

7

STEVAL-PCC009V2

IBU universal interface based on the STM32x

Features

– application mode: the PC GUI allows SPI,

communication parameters

– DFU mode: allows the user to change the

firmware if required to suit specific

applications

type connector

customized PC GUI

Description

The STEVAL-PCC009V2 board implements an

IBU universal interface (IBUUI), which is an

STM32x-based USB-to-serial interface bridge

consisting of a configurable 10-pin interface and a

30-pin interface.

The STM32x microcontroller is used as an

interface between the PC and another end

system. Various communication peripherals are

multiplexed with GPIOs, ADC and PWM channels

in both the 10-pin and 30-pin interfaces.

With these interfaces, there is a provision to

connect a device which can communicate using

users to connect a serial communication-based

device to a PC. At the same time, it allows user

control of some GPIOs available in 10-pin and 30-

pin interfaces, and sets them to input/output mode

as per application requirements.

STEVAL-PCC009V2

www.st.com