MS-101006 datasheet(6/40 Pages) AMPHENOL

6 / 40 page

General Description

These electrical connectors are designated MS

because the interchangeability and operating

characteristics are determined by U.S. Military

Specifications. These specifications are revised

from time to time to incorporate performance

requirements dictated by design advances and

more stringent requirements of allied equipment.

The several designations of MS and 97B

connectors meet different requirements of MIL-

C-5015. These designations and general

descriptions are as follows :

Shell

Shell constructions include solid back shell (A)

and environmental resistant (E, F & R).

Environmental resistant connectors provide a

moisture barrier and assure a positive seal. Shell

styles consist of wall type receptacles (3100),

cable receptacles (3101), box receptacles

(3102), straight plugs (3106) and angle plugs

(3108). Shell hardware is manufactured from

aluminium alloy and cadmium plated with olive

drab chromate finish. This finish has excellent

conductivity; it is non-reflecting and corrosion

resistant. Black anodised finish and cadmium-

free zinc plating with olive drab chromate finish

are also available. For details, contact factory.

Contacts

Pin and socket contacts are of brass and

generally silver plated. Gold plating is also

available. For details contact factory. These

contacts are available for solder or crimp

termination. Special arrangements of contacts

for pre-mating and pre-earth are also available.

Inserts and grommet

Synthetic inserts and grommet manufactured

according to MIL-R-3065, offer high dielectric

strength and are resistant to oils, gasoline and low

temperature. DAP is dimensionally stable, has high

arc resistance and high insulation resistance under

both humidity and thermal stress.

General description

Plugs are available in A, F and R types. Receptacles

are available in A, E, F and R types.

A Solid back shell

Intended for general service usage to provide

convenient means of connecting and disconnecting

electrical circuits in industrial and military

applications.

Environmental resisting

Intended for use where the connector will be subject

to heavy condensation and rapid changes in

temperature or pressure and/or where the connector

is subjected to high vibratory conditions.

Environmental resisting with grommet seal and

strain relief backshell except for 3102 type.

Environmental resisting with grommet seal,

strain relief backshell and front gasket seal for plug

type.

Environmental resisting with grommet seal,

shorter and lightweight.

Features for 97B reverse bayonet coupling connectors

with Mil-C-5015 insert patterns:

Quick positive coupling

Audible and tactile indication of full coupling

Waterproof

No lockwiring required

High shock and vibration capabilities

Operating temperature range with Neoprene

inserts: -55 C to +125 C

Insert available in Neoprene material (alternate

inserts materials available upon request)

Available in both crimp and solder terminations

Contacts available in gold and silver plating

Numerous finishes available

Zinc alloy plating (cadmium free) available

500 couplings minimum

Rugged construction; aluminum or stainless

steel components

Intermateable with existing VG95234

connectors

MS And 97B Series

AMPHENOL

MS-101006 Datasheet(PDF) 6 Page - Amphenol Corporation

MS-101006 Datasheet(HTML) 6 Page - Amphenol Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Datasheet Download

Link URL