| Electronic Components Datasheet Search |
|
LPC1850 Datasheet(PDF) 79 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
LPC1850 Datasheet(HTML) 79 Page - NXP Semiconductors |
|
79 / 149 page ![]() LPC1850_30_20_10 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved. Product data sheet Rev. 6.1 — 7 February 2013 79 of 149 NXP Semiconductors LPC1850/30/20/10 32-bit ARM Cortex-M3 microcontroller • Optional warning interrupt can be generated at a programmable time prior to watchdog time-out. • Enabled by software but requires a hardware reset or a watchdog reset/interrupt to be disabled. • Incorrect feed sequence causes reset or interrupt if enabled. • Flag to indicate watchdog reset. • Programmable 24-bit timer with internal prescaler. • Selectable time period from (Tcy(WDCLK) 256 4) to (Tcy(WDCLK) 224 4) in multiples of Tcy(WDCLK) 4. • The Watchdog Clock (WDCLK) uses the IRC as the clock source. 7.16 Analog peripherals 7.16.1 Analog-to-Digital Converter Remark: The LPC1850/30/20/10 contain two 10-bit ADCs. 7.16.1.1 Features • 10-bit successive approximation analog to digital converter. • Input multiplexing among 8 pins. • Power-down mode. • Measurement range 0 to VDDA. • Sampling frequency up to 400 kSamples/s. • Burst conversion mode for single or multiple inputs. • Optional conversion on transition on ADCTRIG0 or ADCTRIG1 pins, combined timer outputs 8 or 15, or the PWM output MCOA2. • Individual result registers for each A/D channel to reduce interrupt overhead. • DMA support. 7.16.2 Digital-to-Analog Converter (DAC) 7.16.2.1 Features • 10-bit resolution • Monotonic by design (resistor string architecture) • Controllable conversion speed • Low-power consumption 7.17 Peripherals in the RTC power domain 7.17.1 RTC The Real-Time Clock (RTC) is a set of counters for measuring time when system power is on, and optionally when it is off. It uses little power when the CPU does not access its registers, especially in the reduced power modes. A separate 32 kHz oscillator clocks the RTC. The oscillator produces a 1 Hz internal time reference and is powered by its own power supply pin, VBAT. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |