ADXL362BCCZ-R2 datasheet(31/44 Pages) AD

31 / 44 page

Data Sheet

ADXL362

Rev. B | Page 31 of 44

FIFO SAMPLES REGISTER

Address: 0x29, Reset: 0x80, Name: FIFO_SAMPLES

The value in this register specifies the number of samples to

store in the FIFO. The AH bit in the FIFO_CONTROL register

(Address 0x28) is used as the MSB of this value. The full range

of FIFO samples is 0 to 511.

The default value of this register is 0x80 to avoid triggering the

FIFO watermark interrupt (see the FIFO Watermark section for

more information).

The following bit map is duplicated from the FIFO Control

INT1/INT2 FUNCTION MAP REGISTERS

The INT1 and INT2 registers configure the INT1/INT2

interrupt pins, respectively. Bits[B6:B0] select which function(s)

generate an interrupt on the pin. If its corresponding bit is set to

1, the function generates an interrupt on the INT pin. Bit B7

configures whether the pin operates in active high (B7 low) or

active low (B7 high) mode.

Any number of functions can be selected simultaneously for

each pin. If multiple functions are selected, their conditions are

OR'ed together to determine the INT pin state. The status of

each individual function can be determined by reading the

STATUS register. If no interrupts are mapped to an INT pin, the

pin remains in a high impedance state, held to a valid logic state

by a bus keeper.

Address: 0x2A, Reset: 0x00, Name: INTMAP1

Table 15. Bit Descriptions for INTMAP1

Bits

Bit Name

Settings

Description

Reset

Access

INT_LOW

1 = INT1 pin is active low.

0x0

AWAKE

1 = maps the awake status to INT1 pin.

0x0

INACT

1 = maps the inactivity status to INT1 pin.

0x0

ACT

1 = maps the activity status to INT1 pin.

0x0

FIFO_OVERRUN

1 = maps the FIFO overrun status to INT1 pin.

0x0

FIFO_WATERMARK

1 = maps the FIFO watermark status to INT1 pin.

0x0

FIFO_READY

1 = maps the FIFO ready status to INT1 pin.

0x0

DATA_READY

1 = maps the data ready status to INT1 pin.

0x0

ADXL362BCCZ-R2 Datasheet(PDF) 31 Page - Analog Devices

ADXL362BCCZ-R2 Datasheet(HTML) 31 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44

Datasheet Download

Link URL