MIL-DTL-24308G

w/AMENDMENT 2

18

TABLE XI. Qualification inspection – Continued.

1/

Connector class:

1. Classes D and G

-Removable contact connectors.

2. Classes D and G -Nonremovable contact connectors.

3. Classes M and N -Removable contact connectors.

4. Classes M and N -Nonremovable contact connectors.

5. Classes H and K -Nonremovable contact connectors.

2/

Not applicable for periodic inspection.

3/

Not applicable for non-removable contacts.

4/

DC Connectors shall meet the test requirements specified for classes G and D nonremovable contact

connectors.

5/

See 4.5.1.1 (nonmetallic materials of two connector assemblies).

6/

Not applicable for crimp, wrappost, and IDC contacts.

7/

Not applicable for hermetic connectors.

4.4 Conformance inspection.

4.4.1 Inspection of product for delivery. Inspection of product for delivery shall consist of group A inspection.

4.4.1.1 Inspection lot. An inspection lot shall consist of all connectors or removable crimp contacts, as applicable,

covered by one specification sheet, produced under essentially the same conditions, and offered for inspection at one

time.

4.4.1.2 Group A inspection. Group A inspection shall consist of the inspections specified in Table XII, in the order

shown.

4.4.1.2.1 Sampling plan (group A). Table XII tests shall be performed on a production lot basis. Samples shall be

selected as specified in table XIII. If one or more defects are found, the lot shall be screened for that particular defect

and the defective parts removed. A new sample of parts shall be selected as specified in table XIII and all group A

tests again performed. If one or more defects are found in the second sample, the lot shall be rejected and shall not

be supplied to this specification.

TABLE XII. Group A inspection.

Inspection

Requirement

paragraph

Test method

paragraph

Visual and mechanical inspection

3.1, 3.3, 3.4,

3.6, and 3.7

4.5.2

Contact engagement and separation forces

(nonremovable contacts)

3.5.10

4.5.12

Insulation resistance at ambient

temperature

3.5.8

4.5.10

Dielectric withstanding voltage

(sea level)

3.5.6

4.5.8