1

CSM_EE-SX91_DS_E_3_1

Compact Pre-wired Photomicrosensor with Built-in Amplifier (Non-modulated)

EE-SX91

Meeting Customer Needs with Compact

Sensors that Mount with M3 Screws

• Both light-ON and dark-ON outputs provided.

• A compact size and choice of five models for a wide

range of applications.

• Compact NPN and PNP output models.

• Mount using M3 or M2 screws.

• Indicator is visible in many directions for installation

in any location.

• Maximum load current of 100 mA.

• Models with connectors simplify wiring and maintenance.

• Flexible robot cables are standard on all models.

Be sure to read Safety Precautions on

page 6.

Features

A Compact Size and Choice of Five Models

for a Wide Range of Applications

Select any of five models to minimize the space required.

Compact NPN and PNP Output Models

Both NPN and PNP output models are available for use according to

system requirements.

Maximum Load Current of 100 mA

Output control of up to 100 mA is supported for either NPN or PNP

outputs.

Models with Connectors Simplify Wiring and

Maintenance

Using models with connectors allows wiring to be used as it is, with

no need to replace anything but sensors.

Flexible Robot Cables: Standard on All

Models

Robot Cables are effective for moving parts, and are provided as

standard equipment with all models.

Both Light-ON and Dark-ON Outputs

Both light-ON and dark-ON outputs are provided on all models,

allowing outputs to be switched by simply changing the wiring

according to the application.

Indicator Visible from Many Directions for

Installation in Any Location

The light indicator can be checked from up to four directions.

Mount Using M3 or M2 Screws

The EE-SX91 can be mounted using M3 or M2 screws, so it can

easily replace an existing compact sensor mounted with M2 screws.