LM324APWR datasheet(3/34 Pages) NSC

3 / 34 page

LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V

LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV

www.ti.com

SLOS066V – SEPTEMBER 1975 – REVISED JANUARY 2014

Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)

(1)

ALL OTHER

LM2902

UNIT

DEVICES

Supply voltage, VCC

(2)

±13 or 26

±16 or 32

Differential input voltage, VID

(3)

±26

±32

Input voltage, VI (either input)

–0.3 to 26

–0.3 to 32

Duration of output short circuit (one amplifier) to ground at (or below) TA = 25°C, VCC ≤ 15 V

(4)

Unlimited

D package

DB package

Package thermal impedance,

θJA

(4) (5)

N package

°C/W

NS package

PW package

113

FK package

5.61

Package thermal impedance,

θJC

(6) (7)

J package

15.05

°C/W

W package

14.65

Operating virtual junction temperature, TJ

150

°C

Case temperature for 60 seconds

FK package

260

°C

Lead temperature 1,6 mm (1/16 inch) from case for 60

J or W package

300

°C

seconds

Storage temperature range, Tstg

–65 to 150

°C

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating

Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

All voltage values (except differential voltages and VCC specified for the measurement of IOS) are with respect to the network GND.

(3)

Differential voltages are at IN+, with respect to IN

−.

(4)

Short circuits from outputs to VCC can cause excessive heating and eventual destruction.

(5)

Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient

temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.

(6)

Maximum power dissipation is a function of TJ(max), θJA, and TC. The maximum allowable power dissipation at any allowable case

temperature is PD = (TJ(max) – TC)/θJC. Operating at the absolute maximum TJ of 150°C can affect reliability.

(7)

The package thermal impedance is calculated in accordance with MIL-STD-883

ESD Protection

TEST CONDITIONS

TYP

UNIT

Human-Body Model

LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV

±2

Submit Documentation Feedback

Product Folder Links: LM124 LM124A LM224 LM224A LM324 LM324A LM2902 LM2902V LM224K LM224KA

LM324K LM324KA LM2902K LM2902KV LM2902KAV

LM324APWR Datasheet(PDF) 3 Page - National Semiconductor (TI)

LM324APWR Datasheet(HTML) 3 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

Datasheet Download

Link URL