STC3115AIQT datasheet(30/31 Pages) STMICROELECTRONICS

30 / 31 page

Revision history

STC3115

30/31

DocID023755 Rev 4

Revision history

Table 17. Document revision history

Date

Revision

Changes

22-Nov-2012

Initial release

07-Feb-2013

Table 4: added “BATD” and “CD”

Section 6.4: removed option “RSTIO/BATD”

Section 6.5: added “BATD” and “CD”

Section 6.5.1: removed option 2 (BATD/CD is disabled) and 3 (BATD

and RSTIO); removed Figure: BATD and RSTIO - option 2, Figure:

BATD and RSTIO - option 3, and Figure: RSTIO/BATD pin

connection when used as battery detector - option 1 and 2; updated

text with respect to BATD/CD.

Removed Section: Register map (Device 0x13) - engineering

samples.

Updated Table 12

Removed Table: REG_MODE - address 0 (Device 0x13)

Removed Table: Internal default OCV table and OCV offset registers.

Removed Equation 3.

Replaced Figure 15: Flip Chip CSP 1.40 x 2.04 mm package

mechanical drawing.

Updated Table 15: Flip Chip CSP 1.4 x 2.04 mm package

mechanical data.

Updated Table 16: Order code

30-Oct-2013

Replaced silhouette

Updated Features

Updated Equation 1

Updated example of Equation 2

Updated disclaimer

28-Jan-2014

Corrected typographical error in document title.

STC3115AIQT Datasheet(PDF) 30 Page - STMicroelectronics