3

FAR Family (C4 series P/Q type)

s STANDARD FREQUENCY

Notes: • Fujitsu can also develop applicable device in addition to standard devices if it’s oscillation frequency is

from 4 to 16 MHz.

• Resonant resistance of the part other than standard, Fujitsu should specify its resonant resistance

according to applied frequency. (See “• Frequency and standard resonant resistance.”)

• Frequency and standard resonant resistance

s NOTES ON USE

• Handle carefully

• Solder under the following conditions.

5 seconds max. at 230

°C (PCB)

Recommended preheating is 150

°C for one minute in order not to apply extreme heat to the resonator.

• Avoid extreme fluctuations in temperature.

• There is no specific direction in resonator mounting.

• Oscillation data should be examined when used in oscillation circuit with microcomputer or other ICs.

• This is for reflow solder, not for flow solder.

Standard frequency (kHz)

Package size

Resonant resistance

4,000

P

150

Ω max.

(Symbol: 01)

8,000

10,000

12,000

16,000

Q

75

Ω max.

(Symbol: 02)

Frequency

Standard resonant resistance

4.00 to 5.99 MHz

150

Ω max. (Symbol: 1)

6.00 to 16.00 MHz

75

Ω max. (Symbol: 2)