28F016SV datasheet(21/63 Pages) INTEL

21 / 63 page

28F016SV FlashFile™ MEMORY

4.5

Compatible Status Register

WSMS

ESS

DWS

VPPS

654

321

NOTES:

CSR.7 = WRITE STATE MACHINE STATUS

1 = Ready

0 = Busy

RY/BY# output or WSMS bit must be checked to

determine completion of an operation (erase,

erase suspend, or data program) before the

appropriate Status bit (ESS, ES or DWS) is

checked for success.

CSR.6 = ERASE-SUSPEND STATUS

1 = Erase Suspended

0 = Erase in Progress/Completed

CSR.5 = ERASE STATUS

1 = Error in Block Erasure

0 = Successful Block Erase

If DWS and ES are set to “1” during an erase

attempt, an improper command sequence was

entered. Clear the CSR and attempt the

operation again.

CSR.4 = DATA-WRITE STATUS

1 = Error in Data Program

0 = Data Program Successful

CSR.3 = VPP STATUS

1 = VPP Error Detect, Operation Abort

0 = VPP OK

The VPPS bit, unlike an A/D converter, does not

provide continuous indication of VPP level. The

WSM interrogates VPP’s level only after the Data

Program or Erase command sequences have

been entered, and informs the system if VPP has

not been switched on. VPPS is not guaranteed to

report accurate feedback between VPPLK(max)

and VPPH1(min), between VPPH1(max) and

VPPH2(min) and above VPPH2(max).

CSR.2–0 = RESERVED FOR FUTURE ENHANCEMENTS

These bits are reserved for future use; mask them out when polling the CSR.

28F016SV Datasheet(PDF) 21 Page - Intel Corporation

28F016SV Datasheet(HTML) 21 Page - Intel Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63

Datasheet Download

Link URL