©

1994

DATA SHEET

BIPOLAR ANALOG INTEGRATED CIRCUIT

THREE TERMINAL NEGATIVE VOLTAGE REGULATOR

Document No. G11629EJ6V0DS00 (6th edition)

(Previous No. IC-1904)

Date Published May 1998 N CP(K)

Printed in Japan

The information in this document is subject to change without notice.

The mark

shows major revised points.

µPC79M00 series are monolithic three terminal negative regulators which employ internally current limiting, ther-

mal shut down, output transistor safe operating area protection make them essentially indestructible.

They are intended as fixed voltage regulators in a wide range of application including local on card regulation for

elimination of distribution problems associated wide single point regulation.

FEATURES

•

Output current out of 500 mA.

•

On-chip some protection circuit (over current protection, SOA protection and thermal shut down).

•

Low noise.

ORDERING INFORMATION

Part Number

Package

Output Voltage

µPC79M05HF

3-pin plastic SIP (MP-45G) (isolated TO-220)

–5 V

µPC79M08HF

3-pin plastic SIP (MP-45G) (isolated TO-220)

–8 V

µPC79M12HF

3-pin plastic SIP (MP-45G) (isolated TO-220)

–12 V

µPC79M15HF

3-pin plastic SIP (MP-45G) (isolated TO-220)

–15 V

µPC79M18HF

3-pin plastic SIP (MP-45G) (isolated TO-220)

–18 V

µPC79M24HF

3-pin plastic SIP (MP-45G) (isolated TO-220)

–24 V

EQUIVALENT CIRCUIT

PIN CONFIGURATION (Marking Side)

3-pin plastic SIP (MP-45G)

GND

OUTPUT

INPUT

1: GND

2: INPUT

3: OUTPUT

123