19

Data Sheet S18949EJ1V0DS

5. Dark signal non-uniformity : DSNU

Absolute maximum of the difference between ADS and voltage of the highest or lowest output pixel of all the valid

pixels at light shielding. This is calculated by the following formula.

DSNU (mV) : maximum of | dj

dj : Dark signal of valid pixel number j

Register Dark

DC level

ADS

DSNU

Impedance of the output pins viewed from outside.

7. Response : R

Output voltage divided by exposure (lx•s).

Note that the response varies with a light source (spectral characteristic).

8. Image lag : IL

The rate between the last output voltage and the next one after read out the data of a line.

Light

ON

OFF

IL (%) =

× 100