2

ELECTRICAL SPECIFICATIONS

ABSOLUTE MAXIMUM RATING

Guaranteed by design but not tested. Typical parameters are representative of actual device performance but are for reference only.

Industrial grade devices shall be tested to subgroup 1 and 4 unless otherwise specified.

Military grade devices (‘H’ suffix) shall be 100% tested to subgroups 1,2,3 and 4.

Subgroups 5 and 6 testing available upon request.

Subgroups 1,4 TA=TC=25°C

2,5 TA=TC=85°C

3,6 TA=TC=-40°C

Continuous operation at or above absolute maximum ratings may adversely effect the device performance and/or life cycle.

When applying power to the device, apply the low voltage followed by the high voltage or alternatively, apply both at the same time.

Internal solder reflow temperature is 180°C, do not exceed.

6

-42V to 42V

11.4°C/W

-65°C to 150°C

+300°C

+150°C

-40°C to +85°C

CANH,CANL

Thermal Resistance

Storage Temperature Range

Lead Temperature Range

10 Seco nds

Output Switches

Case Operating Temperature

RØJC

-3V transient to + 55V

-0.3V to +5.5V

-0.3V to + VDD +0.3V

10A

16A

High Voltage Supply

Low Voltage Supply

Voltage on any logic, analog input pin

with respect to GND

Continuous Output Current

Peak Output Current (dissipation limited)

+V

+VDD

8

1

2

3

4

5

6

7

8

NOTES:

7

8548-120 Rev. A 4/14