UM0225 datasheet(44/57 Pages) STMICROELECTRONICS

44 / 57 page

Obsolete

Product(s)

- Obsolete

Product(s)

Obsolete

Product(s)

- Obsolete

Product(s)

3 Designing with CAPS

UM0225

43/56

Click the Library button to add non-ST devices to the chain.

Figure 43. Programming dialog for multiple devices

The edit windows contain default values for the current project.

Follow these steps for each device in the device programming chain.

Click the Browse button to use the file browser to load a saved programming data (.obj)

file.

After opening the programming data file, click the Add button to add the file to the JTAG

chain list window. Highlight a file in the list and click Delete to remove the file from the

listed. Highlight the device and click the Move scroll buttons to reorder the chain list.

Note: 1 The list device order must match the physically device order.

2 Device #1 should be the first device on the board that has its TDI pin connected to the JTAG/

ISP programmer.

To change the device type, highlight the device in the device list, then select the desired

device type from the Select device drop-down menu. Click the Update button to apply the

change.

To change the memory region of a device, highlight the device in the device list, then click

the Select region checkbox for the desired region. Multiple regions, including All, may be

checked. Click the Update button to apply the change.

Note:

Different regions can be specified for each device.

Once the JTAG chain and device properties are defined, click the Execute button to

perform the selected programming operation.

UM0225 Datasheet(PDF) 44 Page - STMicroelectronics