Changing the data logger settings

UM0925

18/22

Doc ID17271 Rev 2

Figure 19.

Data logger settings

4.1

Delay selector

The delay selector allows you to choose the delay between two temperature acquisitions.

Click on the update button to set the new delay.

Example: If you choose a 512 ms delay the data logger acquires and saves two

temperature values every second.

4.2

Overwrite checkbox

The overwrite checkbox allows you to choose what the data logger does when the memory

is full.

●

Check the box to enable overwrite: After saving the last temperature, the memory is

cleared and the cycle restarts from the beginning.

●

Uncheck the box to disable overwrite: after saving the last temperature, the data

logger automatically performs a stop condition and remains in this state until the you

send a new start condition.