Features

6U 6-Slot AdvancedTCA Reference Systems

ƒ 6U 6-slot 19" rackmount ATCA shelf with integrated switches and server

blades

ƒ 4 node + 2 hub slots with power distribution and cooling for up to 350W per

slot

ƒ 6 rear transition module (RTM) slots

ƒ Supports two Pigeon Point System redundant Shelf Managers, and one

optional Shelf Alarm Panel

ƒ 40G ATCA-compliant backplane, with triple full mesh on fabric channel

and dual star on base channel, supports up to 10 Gbps and 3.125 Gbps per

differential pair

ƒ Redundant AC and DC power options

ƒ Right-to-Left Push-to-Pull Cooling Mode

ƒ Hot swappable FRUs (blades, RTMs, fan trays, power modules, ShMM, and

Telco alarm module)

ƒ PICMG 3.0 (AdvancedTCA Base Specification) Compliance

Introduction

Advantech’s Netarium™ series of ATCA reference systems are specifically targeted to help network equipment providers reach superior levels of performance over traditional rackmount

servers or appliances and extend their product range at the high end. The series represents a new generation of systems which offer superior performance, scalability and flexibility

with the latest 40 Gigabit Ethernet (40G) backplanes, switches and application blades. Advantech optimizes the systems to achieve the highest possible density at the rack level, with

a maximum number of payload blades, network ports and switching capacity.

Each system is tailored for customers to rapidly deploy in data communication markets for applications which require faster and deeper packet processing such as policy and

charging enforcement, network security, real-time traffic monitoring, load balancing, subscriber analytics and content optimization among others. As ATCA was designed to meet the

carrier-grade constraints of the telecom industry, the systems integrate the chassis, cooling, power distribution and shelf management into an off-the-shelf platform solution capable

of superior 5 NINES availability and reliability.

The mid-range Netarium-6 focuses on the high performance needs of large enterprise customers in a cost effective system loaded with four MIC-5333 dual Intel® Xeon® blades

and 40G switches in a dual-star configuration. The system provides up to 1.28 Tbps switching capacity and each MIC-5333 blade with RTM pair can accommodate up to 4 FMMs

for over 100 Gbps egress per blade with high-speed encryption using FMM-based acceleration modules. The system is an ideal platform for cloud-based security services in private

or data center clouds.

Specifications

Number of slots

Front boards

6 ATCA compliant node or hub boards (4 node boards and 2 hub boards)

RTM’s

6 ATCA rear transition modules

Backplane

IPMB

Bussed (radial available on request)

Base interface

Dual star, 1000 Base-T

Fabric interface

Triple replicated Full mesh, up to 10Gbps and 3.125Gbps per differential pair

Cooling

Technology

Two front pluggable, hot swappable push-pull fan trays with N+1 redundant fans (no degradation with a single fan

failure)

Max. Capacity

3350W/slot with t=12K

Air filter

Front replaceable air inlet filter with presence monitoring

Accessibility

Front

Front boards, ShMC’s, front fan trays

Rear

RTM’s, PEM’s / AC PSU’s, rear fan trays

Power

AC

Integrated dual, redundant AC power supplies, 2725W

230V @ 50.5A or 115V @ 22A (with limited performance) per AC inlet

PSU cooling

Self cooled

DC feed

2 redundant, hot swappable PEMs w. integrated EMI filters

DC voltage

-54V (Nominal -48V)

Current rating

50A per feed

Shelf management

Full featured

Dual, redundant Shelf Manager ACB-V, SW executes on the Pigeon Point Shelf Management Mezzanine 500

(ShMM-500)

Interfaces

RMCP, SSH, SNMP, CLI, Web and serial interfaces

Telco alarms

Optional Telco alarm panel (with three Telco alarm LEDs and one DB15-male Telco alarm connector)

Sensors

FRU presence, fan health, PSU health, temperatures, input voltages

Miscellaneous

ESD plug

Front and rear

Cable management

Front / rear cable trays (optional)

Physical Characteristics

Dimensions (H x W x D)

6U x 19 x 462 mm

Weight

23 kg (chassis weight only)

Preliminary

All product specifications are subject to change without notice

Last updated : 27-May-2014