CONTROL-PIONT-MODULE5000 datasheet(2/3 Pages) ETC2

2 / 3 page

www.echelon.com

Description

Control modules provide a simple, cost-

effective method of adding LonWorks®

technology to any control system. The CPM

5000 consists of a miniature circuit card

containing an FT 5000 Smart Transceiver

chip, Communications Transformer,

crystal, serial EEPROM memory, and

a connector for power, I/O, In-Circuit

Programming and the network. The Smart

Transceiver uses differential Manchester

encoding, and in conjunction with the

FT-X3 communications transformer,

creates a Free Topology network device

that supports a 78kbps data rate. The

small size of the control modules permits

it to be mounted on or inside an OEM’s

product, directly adjacent to the sensors,

outputs, or displays that the module will

control. Designing end products with the

control modules, which have been fully

designed, tested, and qualified to industry

standard quality requirements, can save

hundreds of hours of development time

compared with designing custom modules.

The control module is designed to comply

with FCC Level B requirements, which can

dramatically minimize time-consuming and

expensive laboratory testing, component

selection, and layout redesign work. The

CPM 5000 - Model 55040R-10 is compliant

with the European Directive 2002/95/EC

with regards to the restriction of the use

of certain hazardous substances (RoHS)

in electrical and electronic equipment. The

control module is offered in a compact

vertical mount configuration (dimension

1.7”W x 1.175”H x 0.63”D) to enable

customers to deliver a compact product

that do not take up a lot of space.

The control module is economically priced

for both low- and high-volume users and

communicates at 78kbps to provide a

high speed throughput to meet a wide

range of control applications. The FT-X3

communications transformer, together with

the FT 5000 Smart Transceiver, provides

excellent network isolation. The isolation

delivers very good common mode rejection

and permits the system to operate well

in electrically noisy environments. It also

reduces the susceptibility of the system to

ground loops caused by the use of multiple

node power supplies that float relative to

ground. This architecture lends itself well

to communicating over long distances in

industrial environments.

Additionally Echelon offers a

comprehensive range of development

tools, network interfaces, routers, and

network services tools to simplify the task

of designing and commissioning products

using the control modules. Customers

who require technical support regarding

the control module can contact Echelon’s

technical support.

Features (of the FT 5000 Smart

Transceiver)

• 3.3Voperation.

• Serialinterfaceforinexpensive

externalEEPROMandflash

non-volatilememorydevices.

• Supportsupto254network

variables(NVs).

• User-programmableinterrupts

providefasterresponsetimeto

externalevents.

• 7mmx7mm48-pinQFNpackage.

• Supportspolarity-insensitive,free

topologystar,daisychain,bus,loop,

ormixedtopologywiring.

• 12I/Opinswith35programmable

standardI/Omodes.

• Supportsupto42KBof

applicationcode.

• 64KBofRAM(44KBforapplication

codeanddata)and16KBofROM

on-chipmemory.

• Providesexceptionalimmunity

frommagneticandhigh-frequency

common-modenoise.

• Complieswithworldwide

communicationsstandards.

• ISO/IEC14908-1and14908-2

• ANSI709.1andANSI709.3

• -40°Cto+85°Coperating

temperaturerange.

Number

Signal

Name

Description

GND

Ground

RST~

Reset (active low)

CP3_

RXLED

RxActive for network

activity LED

CP2_

TXLED

TxActive for network

activity LED

No Connect

VDD3V3

3.3 V Input Power

GND

Ground

SCL

I2C serial clock for

external memory

SDA_

CS1~

I2C serial data for

external memory

SVC~

Service (active low)

Number

Signal

Name

Description

IO0

IO0 for I/O objects

IO1

IO1 for I/O objects

IO2

IO2 for I/O objects

IO3

IO3 for I/O objects

IO4

IO4 for I/O objects

IO5

IO5 for I/O objects

IO6

IO6 for I/O objects

IO7

IO7 for I/O objects

IO8

IO8 for I/O objects

IO9

IO9 for I/O objects

IO10

IO10 for I/O objects

IO11

IO11 for I/O objects

MOV_

GND

Return (ground) for

MOV ESD clamp

GND

Ground

FT_

NETA

FT network connection

FT_

NETB

FT network connection

Specifications

CPM 5000

Echelon FT 5000 Smart Transceiver.

Echelon FT-X3 Communications

Transformer.

Control Module

Can be programmed to run at

5, 10, 20, 40 or 80 MHz.

Memory Type

Serial I2C EEPROM.

Data Communication Type

Differential Manchester

encoding.

Transceiver Type

Transformer-isolated.

Isolation Between Network and

FT 5000 chip 0-60 Hz (60 seconds)

1000 VRMS.

Electrostatic Discharge

Designed to comply with EN61000-4-2.

EMI Designed to comply with FCC Part 15

Level B.

CONTROL-PIONT-MODULE5000 Datasheet(PDF) 2 Page - List of Unclassifed Manufacturers

CONTROL-PIONT-MODULE5000 Datasheet(HTML) 2 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3

Datasheet Download

Link URL