UD3H

Preliminary

DUAL TRANSISTOR

UNISONICTECHNOLOGIESCO.,LTD

2 of 2

www.unisonic.com.tw

QW-R218-020.a

PARAMETER

SYMBOL

RATINGS

UNIT

Supply Voltage

50

V

Input Voltage

-10

V

40

V

Output Current

50

mA

100

mA

Power Dissipation (Note 2)

300

mW

Junction Temperature

150

°C

Storage Temperature

-55 ~ +150

°C

Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.

Absolute maximum ratings are stress ratings only and functional device operation is not implied.

2. 200mW per element must not be exceeded.

PARAMETER

SYMBOL

TEST CONDITIONS

MIN TYP MAX UNIT

Input Voltage

0.5

V

3

V

Output Voltage

0.1

0.3

V

Input Current

0.88

mA

Output Current

0.5

µA

Emitter Cutoff Current

30

Transition Frequency (Note 1)

250

MHz

Input Resistance

7

10

13

KΩ

Resistance Ratio

0.8

1

1.2

Note: 1. Transition frequency of the device

UTC assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or

other parameters) listed in products specifications of any and all UTC products described or contained

herein. UTC products are not designed for use in life support appliances, devices or systems where

malfunction of these products can be reasonably expected to result in personal injury. Reproduction in

whole or in part is prohibited without the prior written consent of the copyright owner. The information

presented in this document does not form part of any quotation or contract, is believed to be accurate

and reliable and may be changed without notice.