TECHNICAL DATA SHEET

TECHNICAL DATA SHEET

1

The PE330 high performance test cable’s 0.3 inch diameter and 83% phase velocity offer very low loss performance up to 18

GHz. The durable stainless steel connectors and FEP jacket provide a cost effective design ideal for test environments where

a rugged cable assembly is required. The reduced 0.49 inch diameter SMA body allows for attachment to closely spaced con-

nection points found on multiport components and interface panels. The series is offered with Type N, TNC, and SMA connec-

tors all rated to 18 GHz. A heavy Duty boot provides improved strain relief and adds to the durability of the cable assemblies.

These cable assemblies are built using a double shielded flexible cable, providing excellent shielding effectiveness of greater

than 95 dB. All PE330 cable assemblies are 100% Continuity, Hi-POT, and RF tested to published specifications. Custom

lengths are built to order and shipped same day.

• SMA Body diameter of 0.49 inches

• 83% Velocity of Propagation

• Shielding effectiveness > 95 dB

•

Maximum VSWR is < 1.35:1 to 18 GHz

• Minimum Bend Radius of 1.5 inches

• Operating Temperature range of -55 to +125 °C

• ROHS and REACH Compliant

• Same day shipment of custom lengths

• 100% Continuity, Hi-Pot, and RF tested

Configuration

Connector 1

N Male

Connector 2

SMA Male

Cable Type

PE-P300LL

Electrical Specifications

Frequency Range

DC to 18 GHz

Impedance

50 Ohms

Maximum VSWR

1.35:1

Velocity of Propagation

83 %

RF Shielding

95 dB

Typical Performance by Frequency

Frequency 1

Frequency

400 MHz

Insertion Loss

0 dB/ft [0.10 dB/m]

Power Handling, KWatts

2.9

Frequency 2

Frequency

1000 MHz

Insertion Loss

0.05 dB/ft [0.16 dB/m]

Power Handling

1.8 KWatts

Frequency 3

Frequency

2 GHz

Insertion Loss

0.07 dB/ft [0.23 dB/m]

Power Handling

1.2 KWatts

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,

inventory and certifications: N Male to SMA Male with Reduced Diameter SMA Body Low Loss Test Cable Using PE-

P300LL Coax, RoHS PE337

PE337 REV 1.0

PE337

N Male to SMA Male with Reduced Diameter SMA Body

Low Loss Test Cable Using PE-P300LL Coax, RoHS