LM5033MMXSLASHNOPB datasheet(4/24 Pages) TI

4 / 24 page

LM5033

SNVS181B – APRIL 2004 – REVISED APRIL 2013

www.ti.com

Absolute Maximum Ratings

(1) (2)

VIN to GND

-0.3V to 100V

VCC to GND

-0.3V to 16V

Rt/Sync to GND

-0.3V to 5.5V

Pins 3, 8, 10 to GND

-0.3V to 7.0V

ESD Rating (3)

Human Body Model

2kV

Storage Temperature Range

-65°C to 150°C

Junction Temperature

150°C

Power Dissipation (4)

Internally Limited

(1)

Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Ratings are conditions under which

operation of the device is intended to be functional. For specifications and test conditions, see the Electrical Characteristics.

(2)

If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and

specifications.

(3)

The human body model is a 100 pF capacitor discharged through a 1.5k

Ω resistor into each pin.

(4)

The maximum allowable power dissipation is a function of the maximum allowed junction temperature (TJ(max)), the ambient temperature

(TA), and the junction-to-ambient thermal resistance (θJA). The maximum allowable power dissipation can be calculated from PD =

(TJ(max) - TA) / θJA. Excessive power dissipation will cause the thermal shutdown to activate.

Operating Ratings

(5)

VIN Voltage (Pin1)

15 to 90V

Operating Junction Temperature

-40°C to 125°C

(5)

Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Ratings are conditions under which

operation of the device is intended to be functional. For specifications and test conditions, see the Electrical Characteristics.

Electrical Characteristics

Specifications with standard typeface are for TJ = 25°C, and those with boldface type apply over full Operating Junction

Temperature range. VIN = 48V, VCC = 10V applied externally, RT = 26.7kΩ, unless otherwise stated. See

(1) and (2).

Symbol

Parameter

Conditions

Min

Typ

Max

Units

VCC Startup Regulator (Pins 1, 4)

VCCReg

VCC Voltage

Pin 4 open

9.2

9.6

10.0

Icc-out

VCC Current Limit

Out1, Out2 disabled. Ext.

supply to Vcc disconnected.

Iin

Startup Regulator Current

Normal Operation

150

500

µA

into VIN

VIN = 90V

Ext. VCC Supply

Disconnected and Output

Load = 1800pF

SS Pin = 0V

UVT

VCC Undervoltage

VccReg -

VccReg - 100 mV

Threshold (increasing

300mV

VCC)

UVT Hysteresis

2.3

2.8

3.3

(decreasing VCC)

Icc-in

Supply Current from

SS Pin = 0V

external source to VCC

SS Pin = open and Output

Load = 1800pF

2.5V Reference (Pin 2)

Vref

Output voltage

Pin 2 sink current = 5mA

2.44

2.50

2.56

Current sink capability

5.0

Current Sense (Pin 8)

Threshold voltage

0.45

0.50

0.55

(1)

Min and Max limits are 100% production tested at 25°C. Limits over the operating temperature range are specified through correlation

using Statistical Quality Control (SQC) methods. Limits are used to calculate TI’s Average Outgoing Quality Level (AOQL).

(2)

Typical specifications represent the most likely parametric norm at 25°C operation.

Submit Documentation Feedback

Product Folder Links: LM5033

LM5033MMX/NOPB Datasheet(PDF) 4 Page - Texas Instruments

LM5033MMX/NOPB Datasheet(HTML) 4 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Datasheet Download

Link URL