PCM1606ESLASH2K datasheet(13/27 Pages) BURR-BROWN

Part #	PCM1606E/2K

Description	24-BIT, 192-kHz SAMPLING, 6-CHANNEL, ENHANCED MULTILEVEL, DELTA-SIGMA DIGITAL-TO-ANALOG CONVERTER

PDF	27 Pages

Scroll/Zoom	100%

Manufacturer	BURR-BROWN [Burr-Brown (TI)]

Direct Link	http://www.burr-brown.com

Logo

13 / 27 page

PCM1606

SLES014B – OCTOBER 2001 – REVISED AUGUST 2002

www.ti.com

functional description (continued)

VCOM output

One unbuffered common-mode voltage output pin, VCOM (pin 14) is brought out for decoupling purposes. This

pin is nominally biased to a dc voltage level equal to VCC/2. If this pin is to be used to bias external circuitry, a

voltage follower is required for buffering purposes. Figure 8 shows an example of using the VCOM pin for external

biasing applications.

PCM1606

BIAS [

VCOM

OPA337

–

µF

Figure 8. Biasing External Circuits Using the VCOM Pin

zero flag

zero detect condition

Zero detection for each output channel is independent from the others. If the data for a given channel remains

at a 0 level for 1024 sample periods (or LRCK clock periods), a zero detect condition exists for that channel.

zero output flag

When the data for all channels remains at a 0 level for 1024 sample periods (or LRCK clock periods), the ZEROA

(pin 6) is set to a logic 1 state. The zero flag pin can be used to operate external mute circuits, or used as a status

indicator for a microcontroller, audio signal processor, or other digitally controlled functions.

PCM1606E/2K Datasheet(PDF) 13 Page - Burr-Brown (TI)