LM79M05, LM79M12, LM79M15

SNOS553D – MAY 1998 – REVISED APRIL 2013

www.ti.com

*Required if regulator is separated from filter capacitor by more than 3

″. For value given, capacitor must be solid

tantalum. 25

μF aluminum electrolytic may be substituted.

†Required for stability. For value given, capacitor must be solid tantalum. 25

μF aluminum electrolytic may be

substituted. Values given may be increased without limit.

For output capacitance in excess of 100

μF, a high current diode from input to output (1N4001, etc.) will protect the

regulator from momentary input shorts.

Figure 12. Fixed Regulator

*Improves transient response and ripple rejection.

Do not increase beyond 50

μF.

Select R2 as follows:

LM79M05C

300

Ω

LM79M12C

750

Ω

LM79M15C

1k

Figure 13. Variable Output

*Resistor tolerance of R4 and R5 determine matching of (+) and (

−) outputs.

**Necessary only if raw supply filter capacitors are more than 3

″ from regulators.

Figure 14. ±15V, 1 Amp Tracking Regulators

8

Submit Documentation Feedback

Copyright © 1998–2013, Texas Instruments Incorporated

Product Folder Links: LM79M05 LM79M12 LM79M15