LMC6034IMSLASHNOPB datasheet(2/22 Pages) TI1

2 / 22 page

LMC6034

SNOS608C – MAY 1998 – REVISED MARCH 2013

www.ti.com

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

ABSOLUTE MAXIMUM RATINGS

(1) (2)

Differential Input Voltage

±Supply Voltage

Supply Voltage (V+

− V−)

16V

Output Short Circuit to V+

See(3)

Output Short Circuit to V−

See(4)

Lead Temperature (Soldering, 10 sec.)

260°C

Storage Temperature Range

−65°C to +150°C

Power Dissipation

See(5)

Voltage at Output/Input Pin

(V+) +0.3V, (V−)

−0.3V

Current at Output Pin

±18 mA

Current at Input Pin

±5 mA

Current at Power Supply Pin

35 mA

Junction Temperature(5)

150°C

ESD Tolerance(6)

1000V

(1)

Absolute Maximum Ratings indicate limits beyond which damage to the component may occur. Operating Ratings indicate conditions for

which the device is intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test

conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed.

(2)

If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications.

(3)

Do not connect output to V+, when V+ is greater than 13V or reliability may be adversely affected.

(4)

Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature and/or

multiple Op Amp shorts can result in exceeding the maximum allowed junction temperature of 150°C. Output currents in excess of ±30

mA over long term may adversely affect reliability.

(5)

The maximum power dissipation is a function of TJ(max), θJA, TA. The maximum allowable power dissipation at any ambient temperature

is PD = (TJ(max)–TA)/θJA.

(6)

Human body model, 100 pF discharged through a 1.5 k

Ω resistor.

OPERATING RATINGS

(1)

Temperature Range

−40°C ≤ TJ ≤ +85°C

Supply Voltage Range

4.75V to 15.5V

Power Dissipation

See(2)

Thermal Resistance (

θJA)

(3)

14-Pin SOIC

115°C/W

(1)

Absolute Maximum Ratings indicate limits beyond which damage to the component may occur. Operating Ratings indicate conditions for

which the device is intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test

conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed.

(2)

For operating at elevated temperatures the device must be derated based on the thermal resistance

θJA with PD = (TJ − TA)/θJA.

(3)

All numbers apply for packages soldered directly into a PC board.

DC ELECTRICAL CHARACTERISTICS

Unless otherwise specified, all limits guaranteed for TJ = 25°C. Boldface limits apply at the temperature extremes. V

+ = 5V,

− = GND = 0V, V

CM = 1.5V, VOUT = 2.5V, and RL > 1M unless otherwise specified.

Symbol

Parameter

Conditions

Typical(1)

LMC6034I

Units

Limit(2)

VOS

Input Offset Voltage

max

ΔVOS/ΔT

Input Offset Voltage

2.3

μV/°C

Average Drift

Input Bias Current

0.04

200

max

(1)

Typical values represent the most likely parametric norm.

(2)

All limits are guaranteed at room temperature (standard type face) or at operating temperature extremes (bold type face).

Submit Documentation Feedback

Product Folder Links: LMC6034

LMC6034IM/NOPB Datasheet(PDF) 2 Page - Texas Instruments

LMC6034IM/NOPB Datasheet(HTML) 2 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Datasheet Download

Link URL