Keysight | 86105D (86115D) Option 281 (282) Plug-in Module – Product Fact Sheet

This information is subject to change without notice.

© Keysight Technologies, 2013 - 2014

Published in USA, August 3, 2014

5991-2928EN

www.keysight.com

The key to accurate and consistent optical waveform measure-

ments is a well-controlled frequency response. Both the photo-

detector and the entire signal path from the optical connector to

the electrical sampler must be designed as a system to achieve

the fourth-order Bessel-Thomson response typically required

by industry standards. The standard 86105D (86115D) is able

to provide reference receiver performance at 8.5, 9.95, 10.3,

10.5, 11.1, 11.3, and 14.025 Gb/s rates. Option 281 (282) uses a

different photodetector and electrical sampler than the standard

product, enabling it to achieve a reference receiver response for

281 and 282 do not allow the module to have hardware refer-

ence receivers for rates from 8.5 to 11.3 Gb/s. Option 281/282

plus option IRC allows software filtering to provide reference

receiver performance at any rate from 8 Gb/s to 42 Gb/s.

Pattern lengths are restricted to PRBS 16 or shorter.

86105D (86115D) filter rate options in Gb/s

8.5

9.95 10.31

10.51

10.66 10.71

11.10

11.32

14.03

25.78 28.05

Standard product

*

*

*

*

*

*

*

*

*

Option 100 (102)

*

*

*

*

*

*

*

*

Option 200 (142)

*

Option 281 (282)

*

1

*

*

Configuring a system

A complete system requires an 86100C or 86100D mainframe

and 86105D plug-in module. For low jitter signals, an 86107A

precision timebase module can reduce the residual jitter of the

test system to ~ 100 fs. A synchronous trigger is required, which

can be provided by a pattern generator clock or extracted from

the signal being observed through the N1070A clock recovery

solution.

86100D/86107A/86105D

86100D/86107A/86105D + N1070

The 86100 family of plug-in modules

The 86100 sampling oscilloscope system has a variety of plug-in

modules to provide the ideal bandwidth and number of channels

(up to 16) required for your testing needs:

1. Reference receiver capability for 14.025 Gb/s will be optional. A general purpose 15 Gb/s filter is available with all option 281 (282) modules. While

not guaranteed to meet reference receiver tolerances for 16x Fibre Channel, the response of the 15 Gb/s filter will provide results nearly identical to

those achieved with a compliant receiver. Contact Agilent for details

www.keysight.com/find/86105d

Three-Year Warranty

www.keysight.com/find/ThreeYearWarranty

Keysight’s commitment to superior product quality and lower total cost

of ownership. The only test and measurement company with three-year

warranty standard on all instruments, worldwide.

Model

Description

86105C Optical and electrical channels. Low noise, highest

flexibility with reference receivers from 155 Mb/s to

11.3 Gb/s. Single-mode and multimode compatible

86105D Optical and electrical channels. High fidelity, refer-

ence receivers from 8.5 to 28.05 Gb/s. Single-mode

and multimode compatible

86115D Dual or quad optical channels. High fidelity, refer-

ence receivers from 8.5 to 28.05 Gb/s. Single-mode

and multimode compatible

86116C Optical and electrical channels. Single-mode only,

reference receivers for 25.78 and 28.05 Gb/s or 39,

41, and 43 Gb/s

86108B Dual electrical channels to 50 GHz, integrated clock

recovery, integrated precision timebase

86112A Dual electrical channels to 30 GHz

86117A Dual electrical channels to 50 GHz

86118A Dual electrical channels in remote sampling heads

to 70 GHz

N1045A Dual or quad electrical channels in mini-module

form factor, remote sampling heads to 60 GHz

(allows up to 16 channels in a single mainframe)

54754A Dual electrical channels to 18 GHz, internal step

generators for time-domain reflectometry

See 86100D data sheet, literature number 5990-5824EN for

detailed technical information.