CPS250-M Series Data Sheet

Mechanical Drawings - CPS253-M1

A

C

50.8 0.3

(2X)43.8 0.3

32.77MAX

2.5MAX

(2X)3.5 0.1

4

INPUT

L2

T501

C12

ASSY-J0

J2

J5

J5 -PIN 1

PREFERRED EARTH

J2-PIN 1

BARCODE

Vo(+)

J403

PIN 1

MODEL LABEL

WARNING

LABEL

Vo (+)

Vo (-)

VR1

TRIMPOT FOR OUTPUT ADJUSTABILITY

CLOCKWISE: INCREASING OUTPUT VOLTAGE

TIGHTENING TORQUE:

6.0-8.0Kgf-cm

FULL CLOCKWISE

: 250W

FULL COUNTERCLOCKWISE: 155W

VR2

TRIMPOT FOR OCP LIMIT ADJUST

Notes:

1. OCP can not be adjusted on the fly. Default setting is for 250

W Forced Air.

2. Unit should be turned off before trimpot adjustment.

3. OCP does not vary linearly with the trimpot adjustment. It is

either Full clockwise (250 W) or Full counter clockwise (155

W).

4. Thermal Hot Spot Reference - Do not exceed indicated

temperature limits to ensure operation is within the

conponent thermal derating limits. Measure the component

temperatures using K type thermocouples.

Thermal Hot Spot Reference

Component

Temperature Limit

L2

135 °C

T501

145 °C

Q501

120 °C

C12

95 °C