L-1

REV.: 0/2016

www.recom-power.com

20 Watt

Constant

Current Single

Output

AC/DC Converter

Features

LED

Driver

• Low Profile Case (13mm height max.)

• 350mA to 700mA Constant Current Outputs

• Terminal Block Input/Output with Cable Clamps

• Fully Protected (OLP, SCP, OCP, OTP)

• Suitable for Class I and Class II Luminaires

• low cost

RACD20-LP

Description

These low profile constant current LED drivers have been designed for cost-sensitive applications.

The SELV outputs are suitable for both independently supplied or built-in power-supply LED luminaires.

Their low profile design allows them to be invisibly built into furniture, discreetly mounted under shelves

or integrated in space-restricted applications such as coving lighting, strip lighting or troffer lighting sys-

tems. The power supplies are short circuit and overload protected and come with a full 3-year warranty.

Selection Guide

Part

nom. Input

Input

Output

Output

Efficiency

Output

Number

Voltage

Current Voltage Range

Current

typ.

Power max.

[VAC]

[mA]

[VDC]

[mA]

[%]

[W]

RACD20-350-LP

230

210

2-59

350

86

21W

RACD20-500-LP

230

210

2-40

500

85

20W

RACD20-700-LP

230

210

2-31

700

85

22W

3 YEAR

warranty

3

All LED Drivers may not be used without a load. They must be switched on the primary side only.

Noncompliance may damage the LED or reduce its lifetime.

BASIC CHARACTERISTICS

Parameter

Condition

Min.

Typ.

Max.

Input Voltage Range

198VAC

230VAC

264VAC

Inrush Current

8.0A

Start-up Time

500ms

Input Frequency Range

47Hz

63Hz

No Load Power Consumption

0.5W

Power Factor

full load, 230VAC

0.55

Internal Operating Frequency

full load

45kHz

140kHz

50mAp-p

REGULATIONS

Parameter

Condition

Value

Output Current Accuracy

±5% max.

Line Regulation

5% max.

Load Regulation

5% max.

Notes:

Note1: Measured at 20MHz BW using 0.1µF & 47µF parallel capacitor.

ERP

compliant

IEC/EN61347-1 Certified

IEC/EN61347-2-13 Certified

ENEC Certified

CB Report

EN55015 Compliant