MRF24WN0MB datasheet(25/36 Pages) MICROCHIP

25 / 36 page

 2015 Microchip Technology Inc.

Advance Information

DS50002410A-page 25

MRF24WN0MA/MB

4.5.1

EXTERNAL ANTENNA

REQUIREMENTS

The compliance testing listed in Table 4-1 was per-

formed using the antenna types listed in Table 3-1.

4.6

Japan

The MRF24WN0MA/MB module has received type

certification and is labeled with its own technical confor-

mity mark and certification number as required to con-

form to the technical standards regulated by the

Ministry of Internal Affairs and Communications (MIC)

of Japan pursuant to the Radio Act of Japan.

Integration of this module into a final product does not

require additional radio certification provided installa-

tion instructions are followed and no modifications of

the module are allowed. Additional testing may be

required:

• If the host product is subject to electrical appli-

ance safety (for example, powered from an AC

mains), the host product may require Product

Safety Electrical Appliance and Material (PSE)

testing. The integrator should contact their confor-

mance laboratory to determine if this testing is

required.

• There is an voluntary Electromagnetic Compatibil-

ity (EMC) test for the host product administered

by VCCI: http://www.vcci.jp/vcci_e/index.html

4.6.1

LABELING AND USER

INFORMATION REQUIREMENTS

The label on the final product which contains the

MRF24WN0MA/MB

module

must

Japan

marking requirements. The integrator of the module

should refer to the labeling requirements for Japan

available at the Ministry of Internal Affairs and

Communications (MIC) website.

The MRF24WN0MA/MB module is labeled with its own

technical conformity mark and certification number.

The final product in which this module is being used

must have a label referring to the type certified module

inside:

4.6.2

EXTERNAL ANTENNA

REQUIREMENTS

The compliance testing was performed using the

antenna types listed in Table 3-1.

4.6.3

4.6.2 HELPFUL WEB SITES

Ministry of Internal Affairs and Communications (MIC):

http://www.tele.soumu.go.jp/e/index.htm

Association of Radio Industries and Businesses

(ARIB): http://www.arib.or.jp/english/

4.7

Korea

The MRF24WN0MA/MB module has received certifica-

tion of conformity in accordance with the Radio Waves

Act. Integration of this module into a final product does

not require additional radio certification provided instal-

lation instructions are followed and no modifications of

the module are allowed.

4.7.1

LABELING AND USER

INFORMATION REQUIREMENTS

The label on the final product which contains the

MRF24WN0MA/MB module must follow KC marking

requirements. The integrator of the module should refer

to the labeling requirements for Korea available on the

Korea Communications Commission (KCC) website.

The MRF24WN0MA/MB module is labeled with its own

KC mark. The final product requires the KC mark and

certificate number of the module:

4.7.2

EXTERNAL ANTENNA

REQUIREMENTS

The Korea compliance testing was performed using

the antenna types listed in Table 3-1.

4.7.3

HELPFUL WEB SITES

Korea Communications Commission (KCC):

http://www.kcc.go.kr

National Radio Research Agency (RRA):

http://rra.go.kr

Contains transmitter module with certificate number:

Pending

MSIP-CRI-029-RN4020

Pending

MRF24WN0MB Datasheet(PDF) 25 Page - Microchip Technology

MRF24WN0MB Datasheet(HTML) 25 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Datasheet Download

Link URL