DPS310 datasheet(38/41 Pages) INFINEON

38 / 41 page

8.12

Coefficient Source

States which internal temperature sensor the calibration coefficients are based on: the ASIC temperature sensor

or the MEMS element temperature sensor. The coefficients are only valid for one sensor and it is highly

recommended to use the same temperature sensor in the application. This is set-up in the Temperature

Configuration register.

TMP_COEF_SRCE

Address:

28H

Temperature Coefficients Source

Reset value:

XXH

TMP_COEF_

SRCE

Field

Bits

Type

Description

TMP_COEF_SRCE

Temperature coefficients are based on:

0 - Internal temperature sensor (of ASIC)

1 - External temperature sensor (of pressure sensor MEMS

element)

6:0

Reserved

Package Dimensions

The sensor package is a 8-pin plastic LGA 2.0 x 2.5 x 1.0 mm3, with 0.65 mm pitch.

Detailed information about a package, marking layout and tape and reel description can be found on the link:

https://www.infineon.com/cms/packages/SMD_-_Surface_Mounted_Devices/P-PG-VLGA/P-PG-

VLGA-08-01.html?__locale=en

Package Handling

Further Information please refer to the attached “Digital Barometric Pressure Sensor_ Package Handling”it

describes the package handling and delivery format.

Revision History

Major changes since previous revision

Revision History

Reference

Description

0.1

First draft

0.2

Preliminary datasheet

DPS310 - Digital Pressure Sensor

Digital Barometric Pressure Sensor for Portable Devices

Package Dimensions

V1.0

2016-09-05

DPS310 Datasheet(PDF) 38 Page - Infineon Technologies AG

DPS310 Datasheet(HTML) 38 Page - Infineon Technologies AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41

Datasheet Download

Link URL