For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

11

11 - 71

Pin Number

Function

Description

Interface Schematic

1Vcc

Power supply voltage for the first amplifier stage. An external bypass

capacitor of 330 pF is required as shown in the application schematic.

2, 3, 5, 6, 7,

8, 9, 12, 13,

15, 16

GND

Ground: Backside of package has exposed metal ground slug

that must be connected to ground thru a short path. Vias under

the device are required.

4

RFIN

This pin is AC coupled and matched to 50 Ohms from 5.0 to 6.0 GHz.

10, 11

RFOUT

RF output and DC bias for the output stage.

14

Vpd

Power control pin. For maximum power, this pin should be connected to

3.0V. A higher voltage is not recommended. For lower idle current, this

voltage can be reduced.

Pin Descriptions

GaAs InGaP HBT MMIC

POWER AMPLIFIER, 4.9 - 5.9 GHz

v03.0605

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D