For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

12

12 - 155

The circuit board used in the final application should

use RF circuit design techniques. Signal lines

should have 50 ohm impedance while the package

ground leads and backside ground slug should be

connected directly to the ground plane similar to that

shown. A sufficient number of via holes should be

used to connect the top and bottom ground planes.

The evaluation circuit board shown is available from

Hittite upon request.

Evaluation PCB

Item

Description

J1 - J2

PCB Mount SMA RF Connector

J3

2.92 mm PCB mount k-connector

J4 - J5

2 mm DC Header

C1 - C2

4.7 μF Tantalum Capacitor

C3

100 pF Capacitor, 0402 Pkg.

C4 -C5

1,000 pF Capacitor, 0603 Pkg.

U1

HMC533LP4 / HMC533LP4E VCO

106546 Eval Board

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350

MMIC VCO w/ DIVIDE-BY-16,

23.8 - 24.8 GHz

v00.0405

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D