PISA11

PISA11-Series

EC Declaration of

Conformity

The CE mark indicates conformance with the:

- EMC directive 2004/108/EC,

- Low-voltage directive (LVD) 2006/95/EC,

- RoHS directive 2011/65/EU and the

- ATEX directive 94/9/EC

IEC 60950-1

CB Scheme,

Safety of Information Technology Equipment

UL 508

IND. CONT. EQ.

Listed for the use as Industrial Control Equipment;

U.S.A. (UL 508) and Canada (C22.2 No. 107-1-01);

E-File: E198865

UL 60950-1

Recognized for the use as Information Technology Equipment, Level

5; U.S.A. (UL 60950-1) and Canada (C22.2 No. 60950);

E-File: E137006

NEC Class 2,

only PISA11.401,

PISA11.402

NEC CLASS 2

Recognized as Limited Power Source (LPS) according to UL 60950-1.

Also meet the requirements of NEC CLASS 2 according to UL1310.

UL 2367

Special-purpose Solid-State Overcurrent Protector

Component Recognition; UL Category QVRQ2

E-File: E342020

ANSI / ISA 12.12.01-

2007

(Class I Div 2)

LISTED for use in Hazardous Location Class I Div 2 T4 Groups A,B,C,D

systems; NRTL/C (Canada and U.S.)

EN 60079-15

ATEX

II 3G EX nA nC IIC T4 Gc

Approval for use in hazardous locations Zone 2 Category 3G.

Number of ATEX certificate: EPS 11 ATEX 1 327 X

Evaluated according to EN 60079-0 and EN 60079-15

Marine

GL (Germanischer Lloyd) classified

Environmental category: C, EMC2

Marine and Offshore applications

GOST R

Certificate of Conformity for Russia and other GUS countries

May 2014 / Rev. 1.7 DS-PISA11 - data sheet -

All parameters are specified at 24Vdc input, 25°C ambient temperature and a 5 minutes run-in time unless otherwise noted.

www.pulspower.com Phone +49 89 9278-0

Germany

19/23