4707 Dey Road Liverpool, N.Y. 13088

(315) 701-6751

MIL-PRF-38534 QUALIFIED

Servo Amplifer

Motor Driver

Audio Amplifier

Programmable Power Supply

TYPICAL APPLICATIONS

1 Current Sense

5 Inverting Input

2 No Connection

6 Negative Power Supply

3 Positive Power Supply

7 No Connection

4 Non-Inverting Input

8 Output Drive

1

PIN-OUT INFORMATION

Rev. C 3/01

ISO 9001 CERTIFIED BY DSCC

The above pin out table is for the MSK 541 (TO-3). Refer to the

mechanical specifications page for the pin out information of addi-

tional package styles.

FEATURES:

Available as SMD #5962-8870101

High Output Current - 10 Amps Peak

Wide Power Supply Range - ±10V to ±40V

Programmable Current Limit

FET Input

Isolated Case

Replacement for OMA 541SKB - MSK 541

OMA 541SDB - MSK 146

OMA 541SZB - MSK 147

DESCRIPTION:

The MSK 541 Series is a high power monolithic amplifier ideally suited for high power amplification and magnetic

deflection applications. This amplifier is capable of operation at a supply voltage rating of 80 volts and can deliver

guaranteed continuous output currents up to 5A, making the 541 series an excellent low cost choice for motor drive

circuits. The amplifier and load can be protected from fault conditions through the use of internal current limit

circuitry that can be user programmed with a single external resistor. The MSK 541 is pin compatible with popular

op-amps such as the Burr-Brown OPA501, OPA511, OPA512, OPA541 and 3573. The MSK 541 is available in a

hermetically sealed 8 pin TO-3 package. Other package styles are also available for a wide range of applications.

The MSK 145 is available in a 6 pin SIP Package. The MSK 146 is an 8 pin Power DIP Package and the MSK 147

is available in an 8 pin Power Z-TAB Package for applications requiring bolt down heat sinking.

EQUIVALENT SCHEMATIC

MSK147

MSK145

MSK541

MSK146

HIGH POWER

OP-AMP

MSK 541 ONLY

M.S KENNEDY CORP.

541

SERIES

HIGH POWER

OP-AMP