For further information contact your local STMicroelectronics sales office.

April 2014

DocID025478 Rev 2

1/4

STEVAL-IPT005V1

Smart card interface evaluation board based on the ST8034P

Data brief

Features

• Smartcard connector for testing with a

smartcard

• Labeled testpoints provide accessibility to all

the signals

• Board design allows standalone operation for

basic tests

• Interface to an MCU block and simple board

configurability allow even full functioning in

applications (i.e. set-top box)

• Onboard 10 MHz crystal clock oscillator can be

used to provide card clock in standalone

operation

• Card clock source selection switch allows

selection between the onboard crystal

oscillator as card clock source, or an external

clock source provided by the microcontroller

block through the MCU interface together with

the data signals

• Provides easy, flexible card supply voltage

selection either by onboard configuration

switches or remotely by the microcontroller

• RoHS compliant

Description

The STEVAL-IPT005V1 product evaluation board

is designed both for standalone operation or to be

controlled by the microcontroller. The board is

fully configurable, provides access to all signals

including supply voltage through labeled test

points, and uses a standard connector for simple

communication interfacing with the

microcontroller block. The labeled test points on

the board are in the same order as the signals in

the flat interface cable.

The board provides easy and flexible card supply

onboard configuration switch (driving the tri-state

microcontroller.

The STEVAL-IPT005V1 product evaluation board

addresses market segments including: POS, set-

top boxes, pay TV, identification, banking and

tachographs.

www.st.com