ST72561AR7-Auto datasheet(278/324 Pages) STMICROELECTRONICS

278 / 324 page

Electrical characteristics

ST72561-Auto

278/324

Doc ID 12370 Rev 8

20.4.2

On-chip peripherals

TA = 25°C, fCPU =8 MHz

Table 100.

Clock source current consumption

Symbol

Parameter

Conditions

Typ

Max(1)

Data based on characterization results, not tested in production.

Unit

IDD(RES)

Supply current of resonator

oscillator(2)(3)

Data based on characterization results done with the external components specified in Section 20.5.1:

Crystal and ceramic resonator oscillators, not tested in production.

As the oscillator is based on a current source, the consumption does not depend on the voltage.

See Section 20.5.1: Crystal

and ceramic resonator

oscillators

µA

IDD(PLL) PLL supply current

VDD = 5V

360

IDD(LVD) LVD supply current

HALT mode, VDD = 5V

150

300

Table 101.

Peripheral consumption

Symbol

Parameter

Conditions

Typ

Unit

IDD(TIM) 16-bit timer supply current

(1)

Data based on a differential IDD measurement between reset configuration (timer counter running at

fCPU/4) and timer counter stopped (only TIMD bit set). Data valid for one timer.

VDD = 5.0V

µA

IDD(TIM8) 8-bit timer supply current

(1)

IDD(ART) ART PWM supply current

(2)

Data based on a differential IDD measurement between reset configuration (timer stopped) and timer

counter enabled (only TCE bit set).

IDD(SPI) SPI supply current

(3)

Data based on a differential IDD measurement between reset configuration (SPI disabled) and a permanent

SPI master communication at maximum speed (data sent equal to 55h).This measurement includes the

pad toggling consumption.

400

IDD(SCI) SCI supply current

(4)

Data based on a differential IDD measurement between SCI low power state (SCID = 1) and a permanent

SCI data transmit sequence. Data valid for one SCI.

IDD(ADC) ADC supply current when converting

(5)

Data based on a differential IDD measurement between reset configuration and continuous A/D

conversions.

IDD(CAN) CAN supply current

(6)

Data based on a differential IDD measurement between reset configuration (CAN disabled) and a

permanent CAN data transmit sequence with RX and TX connected together. This measurement include

the pad toggling consumption.

800

ST72561AR7-Auto Datasheet(PDF) 278 Page - STMicroelectronics

ST72561AR7-Auto Datasheet(HTML) 278 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL