STM32L151RCT6A datasheet(27/134 Pages) STMICROELECTRONICS

27 / 134 page

DocID026119 Rev 6

27/134

STM32L151xC/C-A STM32L152xC/C-A

Functional overview

3.13

Ultra-low-power comparators and reference voltage

The STM32L151xC/C-A and STM32L152xC/C-A devices embed two comparators sharing

the same current bias and reference voltage. The reference voltage can be internal or

external (coming from an I/O).

•

One comparator with fixed threshold

•

One comparator with rail-to-rail inputs, fast or slow mode. The threshold can be one of

the following:

–

DAC output

–

External I/O

–

Internal reference voltage (VREFINT) or a sub-multiple (1/4, 1/2, 3/4)

Both comparators can wake up from Stop mode, and be combined into a window

comparator.

The internal reference voltage is available externally via a low-power / low-current output

buffer (driving current capability of 1 µA typical).

3.14

System configuration controller and routing interface

The system configuration controller provides the capability to remap some alternate

functions on different I/O ports.

The highly flexible routing interface allows the application firmware to control the routing of

different I/Os to the TIM2, TIM3 and TIM4 timer input captures. It also controls the routing of

internal analog signals to ADC1, COMP1 and COMP2 and the internal reference voltage

VREFINT.

3.15

Touch sensing

The STM32L151xC/C-A and STM32L152xC/C-A devices provide a simple solution for

adding capacitive sensing functionality to any application. These devices offer up to 23

capacitive sensing channels distributed over 10 analog I/O groups. Both software and timer

capacitive sensing acquisition modes are supported.

Capacitive sensing technology is able to detect the presence of a finger near a sensor which

is protected from direct touch by a dielectric (glass, plastic...). The capacitive variation

introduced by the finger (or any conductive object) is measured using a proven

implementation based on a surface charge transfer acquisition principle. It consists of

charging the sensor capacitance and then transferring a part of the accumulated charges

into a sampling capacitor until the voltage across this capacitor has reached a specific

threshold. The capacitive sensing acquisition only requires few external components to

operate. This acquisition is managed directly by the GPIOs, timers and analog I/O groups

(see Section 3.14: System configuration controller and routing interface).

Reliable touch sensing functionality can be quickly and easily implemented using the free

STM32L1xx STMTouch touch sensing firmware library.

STM32L151RCT6A Datasheet(PDF) 27 Page - STMicroelectronics

STM32L151RCT6A Datasheet(HTML) 27 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL