TSL13FN – 4

ams Datasheet: 2014-Jun-04 [1-00]

E l ec t r i c al C h a r ac teri sti c s

All limits are guaranteed. The parameters with min and max

values are guaranteed with production tests or SQC (Statistical

Quality Control) methods.

Figure 6:

Recommended Operating Conditions

Figure 7:

(1), (2), (3)

Note(s) and/or Footnote(s):

1. Optical measurements are made using small-angle incident radiation from an LED optical source.

2. The 525 nm irradiance Ee is supplied by a InGaN light-emitting diode with the following typical characteristics: peak wavelength

λp = 525 nm and spectral halfwidth Δλ½ = 40 nm.

3. The 850 nm irradiance Ee is supplied by a light-emitting diode with the following typical characteristics: peak wavelength

λp = 850 nm and spectral halfwidth Δλ½ = 42 nm.

4. Irradiance responsivity is characterized over the range VO = 0.2 to 4 V. The best-fit straight line of output voltage VO versus irradiance

Ee over this range may have a positive or negative extrapolated VO value for Ee = 0. For low irradiance values, the output voltage

VO versus irradiance Ee characteristic is nonlinear with a deviation toward VO = 0, Ee = 0 origin from the best-fit straight line

referenced above.

Symbol

Parameter

Min

Typ

Max

Units

Supply voltage

2.7

5.5

V

Operating free-air temperature

-30

70

°C

Symbol

Parameter

Conditions

Min

Typ

Max

Units

Maximum output voltage

4.6

4.9

V

Output voltage

2

1.5

2

2.5

V

2

1.5

2

2.5

Irradiance responsivity

(4)

18.7

mV/(

μW

Extrapolated offset voltage

see note (4)

-0.02

0.03

0.08

V

Dark voltage

2

00.08

V

Supply current

2

0.8

1.3

mA

Electrical Characteristics

TSL13FN_Datasheet, Rev.: 1.0, TSL13FN_Datasheet_[1-00]_Light-To-Voltage Converters

Release Date: 2014-06-17, Key Contact: Matt Kroese