POWER

NLP250CJ Enclosure

NLP250CJ

Cover Accessory Kit

NLP250CJ will fit the NLP250

power supplies.

MATERIALS

ƒ

One (1) cover

ƒ

Four (4) M3x8 mm countersunk

screws

Installation Instructions and Notes

1.

Place the cover over the NLP250 as shown.

2.

Align the cover to the U-bracket countersink holes.

3.

Secure four (4) countersink screws provided with in kit as shown.

4.

Overall dimensions: 7” (177.8 mm) x 4” (101.6 mm) x 1.6” (40.64 mm).

5.

When using this enclosure, ensure that relevant safety standards (e.g., EN60950) are

complied with, in respect to creepage and clearance distances, and distances through

insulation.

6.

All dimensions are in inches (mm)

Installation Notes

GAP PAD

ON MAIN

TRANSFORMER

M3 C'SINK SCREW

WITH 8mm LONG

(4X)