EHA-L50AN1-R02-L1 datasheet(2/4 Pages) VIMARLOW

2 / 4 page

EHA-L37AN1-R02-L1 or EHA-L50AN1-R02-L1

DOC # 102-0390 REV 3 - PAGE 2 OF 4

MECHANICAL DRAWING

Dimensions are in Millimeters

INSTALLATION:

Assembly should be mounted to hot fluid line using the

provided mounting brackets and M 3

bolts with a

maximum torque of 5.0 in-lbs. A layer of graphite has

been adhered to the pipe mounting surface on the EHA-

LXXAN1-R02-L1 to ensure a good thermal contact

between the mounting pipe and the EHA assembly.

Performance will vary greatly with ambient conditions.

For best results, insulate the fluid line feeding into the

assembly and mount assembly in ideal orientation as

shown.

During installation, observe precautions for

handling electrostatic sensitive devices.

CONTENTS:

1 EHA-LXXAN1-R02-L1 Assembly, 1

Wire Harness

OPERATION CAUTIONS:

For maximum reliability, continuous operation below

85°C is recommended. Do not attempt to disassemble

without contacting a Marlow engineer. Doing so could

result in permanent damage to the TG or other system

components.

IMPORTANT NOTE:

Output from the EHA-LXXAN1-R02-L1 is strongly a

function of heat source, ambient temperature, and

electrical load downstream of the converter.

Data

given on this sheet is representative of typical system

performance under steady-state flow and thermal

conditions and is intended for selecting the appropriate

EH series assembly. The data should not be taken as

comprehensive or representative of every operating

condition.

For further information about or questions

regarding the EHA-LXXAN1-R02-L1, please contact a

Marlow applications engineer.

AVAILABLE MODIFICATIONS

Marlow can custom design the EH system to maximize power

output, or to meet size, form factor, or temperature

constraints for any thermal energy harvesting application. In

special cases, Marlow can customize units to accommodate

alternating temperature difference or a reverse temperature

difference. Contact an application engineer for more

information.

(mm)

Model Number

9.5

41.0

EHA-L37AN1-R02-L1

12.7

44.0

EHA-L50AN1-R02-L1

Ideal Orientation

Good Orientation

Acceptable Orientation

Poor Orientation

EHA-L50AN1-R02-L1 Datasheet(PDF) 2 Page - II-VI Marlow, Inc.

EHA-L50AN1-R02-L1 Datasheet(HTML) 2 Page - II-VI Marlow, Inc.

Html Pages

1 2 3 4

Datasheet Download

Link URL