OUTP

OUTN

OUTP

Speaker

Current

OUTP

OUTN

Speaker

Current

OUTP

OUTN

OUTP

Speaker

Current

0 V

0 V

PVCC

No Output

Positive Output

Negative Output

0 A

0 A

0 V

15

TPA3136D2, TPA3136AD2

www.ti.com

SLOS938D – MAY 2016 – REVISED MARCH 2017

Product Folder Links: TPA3136D2 TPA3136AD2

Submit Documentation Feedback

Copyright © 2016–2017, Texas Instruments Incorporated

9.4 Device Functional Modes

The TPA3136D2/TPA3136AD2 device is running in BD-modulation.

This is a modulation scheme that allows operation without the classic LC reconstruction filter when the amp is

driving an inductive load with short speaker wires. Each output is switching from 0 volts to the supply voltage.

The OUTPx and OUTNx are in phase with each other with no input so that there is little or no current in the

speaker. The duty cycle of OUTPx is greater than 50% and OUTNx is less than 50% for positive output voltages.

The duty cycle of OUTPx is less than 50% and OUTNx is greater than 50% for negative output voltages. The

voltage across the load sits at 0 V throughout most of the switching period, reducing the switching current, which

Figure 17. BD Mode Modulation