FN8723 Rev.5.00

Page 39 of 40

Nov 29, 2017

ISL9237

Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted

in the quality certifications found at www.intersil.com/en/support/qualandreliability.html

Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such

modification does not, in Intersil's sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are

current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its

subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or

otherwise under any patent or patent rights of Intersil or its subsidiaries.

For information regarding Intersil Corporation and its products, see www.intersil.com

For additional products, see www.intersil.com/en/products.html

© Copyright Intersil Americas LLC 2016-2017. All Rights Reserved.

All trademarks and registered trademarks are the property of their respective owners.

About Intersil

Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products

address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets.

For the most updated datasheet, application notes, related documentation and related parts, please see the respective product

information page found at www.intersil.com.

You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask.

For a listing of definitions and abbreviations of common terms used in our documents, visit: www.intersil.com/glossary.

Reliability reports are also available from our website at www.intersil.com/support.

warranted. Please go to the web to make sure that you have the latest revision.

DATE

REVISION

CHANGE

Nov 29, 2017

FN7823.5

Added Way Overcurrent Protection (WOCP) function to datasheet.

October 4, 2017

FN7823.4

Applied new header/footer and formatting.

Updated Related Literature Removed Way Overcurrent Protection (WOCP) feature from datasheet. Made

Bit 1 on page 24 “Not used”.

July 7, 2016

FN8723.3

Removed confidential information to make the datasheet publicly available on the web.

June 7, 2016

FN8723.2

Added Related Literature section.

Updated the Ordering Information table by adding the Evaluation board part number.

Fixed typo on Figure 2 on page 5.

Updated “Power Source Selection” on page 29.

Updated “Stand-Alone Comparator” on page 31.

May 12, 2016

FN8723.1

Updated Note 1 by adding “-T7A” option.

Removed Evaluation Board from ordering information table.

-Table 13 on page 23 updated Bit 11 from "Bit<11> configures the debounce time from ACOK assertion

to switching" to "Bit<11> configures the debounce time from adapter insertion to ASGATE turning on" and

changed the Bit name from “Adapter Insertion to Switching Debounce” to “Adapter Insertion to ASGATE

Turning ON Debounce”.

-Table 18 on page 28 added Min and Max column to the table and updated Typ 1% values. Changed the

note from "207kΩ is not standard resistor" to "203kΩ is not standard resistor”.

February 10, 2016

FN8723.0

Initial Release